When first using a USB memory immediately following purchase or formatting with the MGP32X and MGP24X, and after pressing the record button, a message such as “Storage Full!” may appear on the screen (depending on the USB memory), after which it may be impossible to use the USB recorder function. This is due to an error relating to the information on the free space in the USB memory immediately following purchase or formatting. If the information on the free space in the USB memory is initialized, it might take too much time for the mixer to analyze the amount of free space.
This error can be avoided by copying a file into the USB memory, or performing some other file operation on it, thereby updating the free space information.
When using a USB memory with the MGP32X and MGP24X, it is recommended that you first conduct the operation described above.
(If the abovementioned condition occurs)
Remove the USB memory from the mixer and turn the power off and then on again.
When you use the USB memory again, carry out a file operation on a computer such as copying a file into the USB memory.
The equalizer is definitely the most important piece of equipment in your audio rack! Most transceivers do an excellent
job of passing all the midrange frequencies between 300Hz ~ usually with an added dominance between 500Hz ~ 800Hz. Unfortunately, most
stock transmitters roll-off the bass frequencies below about 150Hz and down, as well as the high frequencies above about and up. So, we
need to do basically three things:
* Reduce the Midrange
* Increase the Bass
* Increase the Treble
Taking a look once again at GRAPH 1 and GRAPH 2 above, you can see what an EQ can accomplish when set up. Below is a graphical representation of what EQing I had to implement in order to get some flatness out of my Kenwood TS-850S/DSP-100 after passing through its . and DSP filtering.